Dongtai Yaoqiang machinery Co.,Ltd
TECHNOLOGY CREATES VALUE,INTEGRITY LEADS TO WIN-WIN
Add to Cart
Vertical Bed type CNC High Speed Drilling Machine for Hole and Plate
XBJ series milling machine is an advanced and efficient milling equipment that implements the new process of milling instead of planing, and has obtained the latest products issued by the National Patent Office.
It is widely used in pressure vessel, boiler, shipbuilding, electric power, chemical industry, machinery and steel structure parts, large formwork and other industries.
It is especially used for processing and milling special alloy plates
parts, large formwork and other industries. It is especially used for processing and milling special alloy plates.
| XBJ edge milling machine | ||||
| model | XBJ-3 | XBJ-6 | XBJ-9 | XBJ-12 |
| effective milling scope length m | 3 | 6 | 9 | 12 |
| milling edge adjustment range° | 0-45 | 0-45 | 0-45 | 0-45 |
| adaptable steel plate thickness mm | 6-80 | 6-80 | 6-80 | 6-80 |
| max. milling width mm | 2--4 | 2--4 | 2--4 | 2--4 |
| milling cutter forward speed mm/min | 100-1000 AC frequency stepless speed adjustment AC frequency stepless speed adjustment | |||
| milling cutter backward speed mm/min | 4 | 4 | 4 | 4 |
| milling shaft speed rpm | 100-1000 | |||
| hydraulic pressure Mpa | ≥3.5 | ≥3.5 | ≥3.5 | ≥3.5 |
| hydraulic head qty. pc | 5 | 8 | 11 | 15 |
| supporting flat height mm | 900 | 900 | 900 | 900 |
| feeding motor power kw | 1.5 | 1.5 | 1.5 | 1.5 |
| oil pump motor power kw | 4 | 4 | 5.5 | 5.5 |
Equipment composition:
The equipment is mainly composed of the following parts:
(1) bed
(2) bed column
(3) press beam
(4) hydraulic cylinder
(5) lifting column
(6) milling power head
(7) power trolley
(8) guide rail
(9) Milling cutter head
(10) Hydraulic control system
(11) Electrical control box
(12) Lubrication device
(13) Conductive device
(14) Positioning device
(15) Protective device
(16) Feeding device
(17) Paint
Main technical parameters of XBJ 3M single head milling machine
| No. | Name | value | Unit | Note |
| 1 | Single effective milling length | 3000 | mm | |
| 2 | Processing steel plate thickness | 6-80 | mm | |
| 3 | Milling angle cutter head | 0- 75 | º | Can use forming cutting tools |
| 4 | Fast forward and rewind speed | ≈0-3000 | mm/min | |
| 5 | Milling speed | 250-1200 | mm/min | |
| 6 | Max milling stroke | ≥150mm | ||
| 7 | Max milling vertical stroke | ≥260mm | ||
| 8 | Frequency conversion speed regulation of milling head | 75-505rpm/min | ||
| 9 | Bed straightness | ≤1.5mm | ||
| 10 | Bed parallelism | ≤1.5mm | ||
| 11 | Surface roughness | Ra6.3-12.5 | According to walking speed | |
| 12 | Speed of milling power head | 960 | r/min | Special milling head |
| 13 | Maximum pressure of hydraulic station | MPa | 3.5 | |
| 14 | Milling cutter diameter | 125 | mm | |
| 15 | Number of hydraulic pressure cylinders | 18 | pcs | |
| 16 | Effective stroke of hydraulic cylinder | 150 | mm | |
| 17 | Main feeding mechanism | 9 | pcs | |
| 18 | Height of pressing table from ground | 850 | mm | |
| 19 | Feed motor power | 1.5 | KW | frequency speed regulation |
| 20 | Milling motor power | 5.5 | KW | |
| 21 | Lifting motor power | 0.75 | KW | |
| 22 | Oil pump motor power | 5.5 | KW | |
| 23 | Equipment size | L7000mm×W2650mm×H2400mm | ||
| 24 | Power supply | 3 phsae 380VAC(±15%),50Hz(±1Hz) | ||
| 25 | Environmental conditions | -10ºC -45ºC Relative humidity:20%-95% | ||
| 26 | Machine noise | <85dB(A) | ||
| 27 | Altitude | <1500m | ||